using BZFAStandardLib;
using Newtonsoft.Json;
using System;
using static System.Runtime.CompilerServices.RuntimeHelpers;

namespace MainForm.ClassFile.XiaomiAPI
{
    /// <summary>
    /// 小米 MqttClient类 - API拓展方法
    /// 过站结果
    /// </summary>
    public partial class XiaomiMqttClient_Extend : XiaomiMqttClient
    {
        /// <summary>
        /// 过站结果- 事件Id
        /// </summary>
        private static string PassStationResultId { get; set; } = "pass_details_log/passing_station_log";

        /// <summary>
        /// 过站结果- 事件方法
        /// </summary>
        /// <param name="msg">事件数据;Json</param>
        /// <param name="dataId">自定义事件Id;如：guid</param>
        /// <returns></returns>
        public static (int, string) Write_PassStationResult(PassStationResultRequest request, string dataId = "")
        {
            int result = 0;
            string resultStr = "";

            string msg = JsonConvert.SerializeObject(request);
            byte[] bytes = ToUTF8(msg);

            // 发送
            if (string.IsNullOrEmpty(dataId))
                result = Write(PassStationResultId, bytes);
            else
                result = WriteWithDataId(PassStationResultId, bytes, dataId);

            var try1 = Enum.TryParse(result.ToString(), out XiaomiMqttResponse_ErrCode errCode);
            if (try1)
                resultStr = errCode.ToString();
            else
                resultStr = XiaomiMqttResponse_ErrCode.ERR_UNKOWN.ToString();

            string logPath = GlobalContext.MqttAlarmLogDir + "PassStationResult" + DateTime.Now.ToString("yyyyMMdd") + ".txt";
            FileOperate.NewTxtFile(logPath, "MQTT【过站结果】提交：" + msg + "\r\n==>提交结果：" + resultStr + "");

            return (result, resultStr);
        }

        /// <summary>
        /// 过站结果- 参数
        /// </summary>
        public class PassStationResultRequest
        {
            /// <summary>
            /// 过站唯⼀标识(36位)
            /// string[1,64]
            /// 要确保唯⼀性，每次过站时⽣成的ID必须唯⼀。
            /// • 对于同⼀次过站⽽⾔，过站明细中的pass_station_id字段值与过站结果中的pass_station_id字段值是⼀样的。
            /// • 与mes中的过站明细uuid字段uuidInspection要求⼀致（这两个值需确保是⼀致的，以MES为主，如果关闭MES⽣产，则此项传空字符串）
            /// </summary>
            public string pass_station_id { get; set; } = Guid.NewGuid().ToString();

            /// <summary>
            /// 项⽬编码
            /// string[1,32]
            /// </summary>
            public string project_code { get; set; } = string.Empty;

            /// <summary>
            /// ⼯⼚Id
            /// string[1,64]
            /// </summary>
            public string factory_code { get; set; } = string.Empty;

            /// <summary>
            /// ⼯段编码
            /// string[1,32]
            /// </summary>
            public string process_section_code { get; set; } = string.Empty;
            /// <summary>
            /// 线体编码
            /// string[1,32]
            /// </summary>
            public string line_code { get; set; } = string.Empty;
            /// <summary>
            /// ⼯站
            /// string[1,32]
            /// </summary>
            public string work_station { get; set; } = string.Empty;

            /// <summary>
            /// 装备编码
            /// string[1,32]
            /// </summary>
            public string device_code { get; set; } = string.Empty;
            /// <summary>
            /// ⼯位Id
            /// string[1,32]
            /// 与MES那边的stationId保持⼀致
            /// </summary>
            public string station { get; set; } = string.Empty;
            /// <summary>
            /// 过站时间
            /// string[1,32]
            /// 日期格式：2022-06-01 14:27:57.283
            /// </summary>
            public string process_time { get; set; } = string.Empty;

            /// <summary>
            /// 槽位编码
            /// string[1,32]
            /// </summary>
            public string slot { get; set; } = string.Empty;
            /// <summary>
            /// 产品SN
            /// string[1,32]
            /// </summary>
            public string sn { get; set; } = string.Empty;
            /// <summary>
            /// 进站状态：PASS/FAIL
            /// string[1,32]
            /// MES进站接⼝调⽤状态
            /// </summary>
            public string enter_status { get; set; } = "PASS";
            /// <summary>
            /// 过站结果
            /// string[1,32]
            /// PASS/FAIL 
            /// </summary>
            public string result { get; set; } = "PASS";
            /// <summary>
            /// 作业类型
            /// string[1,32]
            /// PRESSURE_TEST(压测)
            /// POINT_CHECK(点检)
            /// OUT_STATION(正常跑料数据)
            /// </summary>
            public string work_type { get; set; } = "OUT_STATION";
        }


        /// <summary>
        /// 过站明细- 事件方法
        /// </summary>
        /// <param name="msg">事件数据;Json</param>
        /// <param name="dataId">自定义事件Id;如：guid</param>
        /// <returns></returns>
        public static (int, string) Write_PassStationDetail(PassStationDetailRequest request, string dataId = "")
        {
            int result = 0;
            string resultStr = "";

            string msg = JsonConvert.SerializeObject(request);
            byte[] bytes = ToUTF8(msg);

            // 发送
            if (string.IsNullOrEmpty(dataId))
                result = Write(PassStationResultId, bytes);
            else
                result = WriteWithDataId(PassStationResultId, bytes, dataId);

            var try1 = Enum.TryParse(result.ToString(), out XiaomiMqttResponse_ErrCode errCode);
            if (try1)
                resultStr = errCode.ToString();
            else
                resultStr = XiaomiMqttResponse_ErrCode.ERR_UNKOWN.ToString();

            string logPath = GlobalContext.MqttPassResultLogDir + "PassStationDetail" + DateTime.Now.ToString("yyyyMMdd") + ".txt";
            FileOperate.NewTxtFile(logPath, "MQTT【过站明细】提交：" + msg + "\r\n==>提交结果：" + resultStr + "");

            return (result, resultStr);
        }

        /// <summary>
        /// 过站结果- 参数
        /// </summary>
        public class PassStationDetailRequest
        {
            /// <summary>
            /// 过站唯⼀标识(36位)
            /// string[1,64]
            /// 要确保唯⼀性，每次过站时⽣成的ID必须唯⼀。
            /// • 对于同⼀次过站⽽⾔，过站明细中的pass_station_id字段值与过站结果中的pass_station_id字段值是⼀样的。
            /// • 与mes中的过站明细uuid字段uuidInspection要求⼀致（这两个值需确保是⼀致的，以MES为主，如果关闭MES⽣产，则此项传空字符串）
            /// </summary>
            public string pass_station_id { get; set; } = Guid.NewGuid().ToString();

            /// <summary>
            /// 项⽬编码
            /// string[1,32]
            /// </summary>
            public string sn { get; set; } = string.Empty;

            /// <summary>
            /// ⼯⼚Id
            /// string[1,64]
            /// </summary>
            public string slot { get; set; } = string.Empty;

            /// <summary>
            /// 测试项序号
            /// string[1,32]
            /// </summary>
            public string test_item_num { get; set; } = string.Empty;
            /// <summary>
            /// 功能名称
            /// string[1,32]
            /// ⼤类(可以是检测⼤类或加⼯项⼤类)，枚举值如下：
            /// • Machine_加⼯模块，加⼯相关的⼯艺参
            /// • Test_测试模块，检测项相关
            /// • Fixture_Process，治具信息
            /// • Material_Process，物料信息
            /// • Tool_Process，软件版本信息
            /// • File_Process，⽂件相关信息
            /// </summary>
            public string function_name { get; set; } = string.Empty;
            /// <summary>
            /// 测试项
            /// string[1,32]
            /// </summary>
            public string test_item { get; set; } = string.Empty;

            /// <summary>
            /// 测试值/输出值
            /// string[1,32]
            /// value(和测试项对应的值，可以是检测值/算法的输出值/⼯艺参数值)
            /// </summary>
            public string result_val { get; set; } = string.Empty;
            /// <summary>
            /// 上限值
            /// string[1,32]
            /// </summary>
            public string hi_limit { get; set; } = string.Empty;
            /// <summary>
            /// 下限值
            /// string[1,32]
            /// </summary>
            public string low_limit { get; set; } = string.Empty;
            /// <summary>
            /// 测试状态
            /// string[1,32]
            /// PASS/FAIL
            /// </summary>
            public string status { get; set; } = "PASS";
            /// <summary>
            /// 单项测试时间
            /// </summary>
            public string test_time { get; set; } = string.Empty;
            /// <summary>
            /// 错误码
            /// </summary>
            public string error_code { get; set; } = string.Empty;
            /// <summary>
            /// 描述
            /// string[1,32]
            /// 中⽂描述或说明备注信息
            /// </summary>
            public string description { get; set; } = string.Empty;
          
        }
    }
}