xiaomiMes/MainForm/ClassFile/XiaomiAPI_IOT/Extend/XiaomiMqttClient_PassStationResult.cs

using Newtonsoft.Json;
using System;

namespace MainForm.ClassFile.XiaomiAPI
{
    /// <summary>
    /// 小米 MqttClient类 - API拓展方法
    /// 过站结果
    /// </summary>
    public partial class XiaomiMqttClient_Extend : XiaomiMqttClient
    {
        /// <summary>
        /// 过站结果- 事件Id
        /// </summary>
        private static string PassStationResultId { get; set; } = "pass_station/pass_station_result";

        /// <summary>
        /// 过站结果- 事件方法
        /// </summary>
        /// <param name="msg">事件数据;Json</param>
        /// <param name="dataId">自定义事件Id;如：guid</param>
        /// <returns></returns>
        public static int Write_PassStationResult(PassStationResultRequest request, string dataId = "")
        {
            int result = 0;

            string msg = JsonConvert.SerializeObject(request);
            byte[] bytes = ToUTF8(msg);

            // 发送
            if (string.IsNullOrEmpty(dataId))
                result = Write(PassStationResultId, bytes);
            else
                result = WriteWithDataId(PassStationResultId, bytes, dataId);

            return result;
        }

        /// <summary>
        /// 过站结果- 参数
        /// </summary>
        public class PassStationResultRequest
        {
            /// <summary>
            /// 过站唯⼀标识(36位)
            /// string[1,64]
            /// 要确保唯⼀性，每次过站时⽣成的ID必须唯⼀。
            /// • 对于同⼀次过站⽽⾔，过站明细中的pass_station_id字段值与过站结果中的pass_station_id字段值是⼀样的。
            /// • 与mes中的过站明细uuid字段uuidInspection要求⼀致（这两个值需确保是⼀致的，以MES为主，如果关闭MES⽣产，则此项传空字符串）
            /// </summary>
            public string pass_station_id { get; set; } = Guid.NewGuid().ToString();

            /// <summary>
            /// 项⽬编码
            /// string[1,32]
            /// </summary>
            public string project_code { get; set; } = string.Empty;

            /// <summary>
            /// ⼯⼚Id
            /// string[1,64]
            /// </summary>
            public string factory_code { get; set; } = string.Empty;

            /// <summary>
            /// ⼯段编码
            /// string[1,32]
            /// </summary>
            public string process_section_code { get; set; } = string.Empty;
            /// <summary>
            /// 线体编码
            /// string[1,32]
            /// </summary>
            public string line_code { get; set; } = string.Empty;
            /// <summary>
            /// ⼯站
            /// string[1,32]
            /// </summary>
            public string work_station { get; set; } = string.Empty;

            /// <summary>
            /// 装备编码
            /// string[1,32]
            /// </summary>
            public string device_code { get; set; } = string.Empty;
            /// <summary>
            /// ⼯位Id
            /// string[1,32]
            /// 与MES那边的stationId保持⼀致
            /// </summary>
            public string station { get; set; } = string.Empty;
            /// <summary>
            /// 过站时间
            /// string[1,32]
            /// 日期格式：2022-06-01 14:27:57.283
            /// </summary>
            public string process_time { get; set; } = string.Empty;

            /// <summary>
            /// 槽位编码
            /// string[1,32]
            /// </summary>
            public string slot { get; set; } = string.Empty;
            /// <summary>
            /// 产品SN
            /// string[1,32]
            /// </summary>
            public string sn { get; set; } = string.Empty;
            /// <summary>
            /// 进站状态：PASS/FAIL
            /// string[1,32]
            /// MES进站接⼝调⽤状态
            /// </summary>
            public string enter_status { get; set; } = "PASS";
            /// <summary>
            /// 过站结果
            /// string[1,32]
            /// PASS/FAIL 
            /// </summary>
            public string result { get; set; } = "PASS";
            /// <summary>
            /// 作业类型
            /// string[1,32]
            /// PRESSURE_TEST(压测)
            /// POINT_CHECK(点检)
            /// OUT_STATION(正常跑料数据)
            /// </summary>
            public string work_type { get; set; } = "OUT_STATION";
        }
    }
}